Upgrade your security panel with a new GTCOM2 communicator and never miss an alarm. Universal GSM communicator PSTN DTMF Contact ID to sms converter. PSTN DTMF Contact ID to Ansi SIA-DC09 converter to CMS central monitoring station receiver. A cost-effective solution that provides GSM/GPRS connectivity for any non-GSM security alarm panel. Available in 2G/3G/4G/LTE mobile network versions. GTCOM2 GSM Communicator is special for converting the PSTN Ademco Contact ID Control panel to SMS alert and SIA IP over GPRS network.
It Works worldwide !!!
GTCOM2-4G works on any 2G/3G/4G networks worldwide:
- North America
- Module Bands: 4G – FDD-LTE:B2/ B4/ B12, 3G-WCDMA:B2/B5.
- Compatible providers: USA: AT&T, T-Mobile, Canada: Chatr Mobile.
- NOT WORK WITH Verizon. Upon larger quantities request we can customize device to work with Verizon network.
- South America
- Other regions
Fast and Easy Installations
You only need alarm panel to power up the GTCOM2. No router configuration is needed as well.
Ability to configure the communicator in SERA2 will make the installation 2 times faster!
Ability to real time diagnostic and testing of device saves installer time.
Maintain GTCOM2 from your chair – configure and update its firmware remotely!
You can choose from 4 different ways of the mounting:
- Wall mounting (no need to open enclosure)
- DIN Rail Mounting
- VELCRO Hook and loop Self Adhesive Sticky Back tape fastener
- Flush mounting over electrical wall box 60mm EU standard
- Receiving of Contact ID codes from the security control panel and their converting into SMS readable format.
- Individual protection of houses, garages, cottages and other premises.
- Remote control of the devices via GSM network
- Access control. Gate/door control.
- Automation of premises, temperature and voltage control.
- Heating system or Climate control equipment, programmable temperature alarm hysteresis, Alarm and Restore temperature
- Contact ID to readable SMS message text converter. Receiving of Contact ID codes from the security control panel and their converting into SMS readable format. No limit of distance.
- SMS text simple-to-change. SMS text in your native language and short call additionally informs about system alarm.
- Never miss ALARM !!!!. Short call additionally informs about system alarm. Till call will be acknowledged.
- Receives PSTN DTMF Ademco Contact ID codes from any security panel with PSTN communicator. Practically the module can work with any central panel which has PSTN communicator and meets Ademco Contact ID data format according to SIA SIA DC-05 standard. Also Central panel must support phone number dialing using DTMF tones. (Pulse dialing is not supported by GTCOM)
- Can ARM/DISARM Panel remotely via short call, APP, WEB, SMS, RFID, iButton
- Detailed Alarm Event notifications. And all other events like , bypass, low batter, ac fault, etc.
- System control by using maxim-dallas iButton keys (iButton DS1990A – 64 bit id)
- 32 Temperature sensors or 1 humidity/temperature sensor. for automation purposes. HVAC temperature control, tracking, alarm and control.
- 2 inputs/outputs for remote control via gsm cell phone
- 2 inputs
- Wiegand reader
- 8 general alarm inputs including power supply voltage monitoring via sms messages
- 800 remote control users via free short call
- 800 users control by GSM call or using maxim-dallas iButton keys
- Configuration using standard mini-USB cable
- Remote configuration and firmware upgrade
- Easy installation. Testing and diagnostic of the module via USB by using program SERA. Very useful features is troubleshooting and testing of the module via USB PC; this saves time for installer and allows real-time monitoring of module parameters, input/output and GSM modem status (IMEI, SIM, registration) etc.
- Free configuration and diagnostic software
- Free android APP and WEB Cloud service.
- Virtually unlimited cloud event log
GTCOM2 connects to your existing alarm control panel to convert Contact ID to SMS. It is designed for people who wish to have monitoring of their security control panels without paying for external back-to-base monitoring.
The list of Central panels which are tested with GTCOM2 GSM communicator Contact ID to SMS converter:
DSC PC1616; DSC 1565; DSC 5010;
Paradox SPC-1738EX; Paradox Digiplex Evo192; Esprit; Spectra; Imperial; All SP series.
Pyronix Matrix 6;
Practically the module can work with any central panel which has PSTN communicator and meets Ademco Contact ID data format according to SIA SIA DC-05 standard. Also Central panel must support phone number dialing using DTMF tones. (Pulse dialing is not supported by GTCOM)
|Important: the security control panel must support tone (DTMF) dialing. Also data transfer CONTACT ID protocol must be in DTMF tones. Pulse format is not supported.|
A lot of security control panels are able to transfer events to the security monitoring stations via PSTN land phone line via Contact ID protocol. These messages help to quickly find out where the event took place and what kind of event is it, e.g. triggered sensor, security system in ARM state, security system troubles, network failure etc. However a lot of security control panels are not able to send SMS to a user to inform about alarms and other events of the security system. To solve this problem the module GTCOM2 has been developed, which can simulate PSTN line, receive DTMF Contact ID messages and convert them into readable format as well as to send SMS message to a user via GSM network. The module is compatible with any security control panel, which supports DTMF (tone) dialing and Ademco Contact ID data format according to SIA SIA DC-05 standard. The GTCOM2 module may be applied for protection of house, garages, cottages, vehicles as well as for access control, gate control, objects’ automation, smart house and temperature control. For premises protection and in many other applications.
GTCOM2 module simulates operation of dial-up line and received Contact ID messages from the security control panel. All information from the security control panel to the module is being transferred in DTMF tones.
From the security control panel receives CONTACT ID message as follows: ACCT MT Q XYZ GG CCC S
The following message codes are being described in order to convert CONTACT ID message into SMS text: Q:XYZ:GG:CCC Q- event qualifier, XYZ– event code, GG- partition, CCC-zone/user number. To describe CONTACT ID message codes 4 tables are used. Event description text may be changed. Thus desirable text may be generated for every received CONTACT ID message.
|GSM modem frequencies|
|Administrators||up to 8|
|Users database (Phones, iButton, RFID, Codes)||up to 800|
|Land Line PSTN Emulator.||TIP/RING DTMF Contact ID Receiver / Converter|
|Number of inputs|
|Number of I/O|
|Number of Sensors: temperature, humidity||up to 32|
|Buffer for unsent events||up to 3072 events|
|Nonvolatile flash Event LOG||up to 3072 events|
|Overall dimensions of the module||73x62x26mm|
|Operating temperature range||-20…+55 °C|
|Humidity||0-90% RH @ 0… +40°C (0-90% RH @ +32… +104°F) (non-condensing)|
|SERA2 configuration and monitoring software|
|Play Store Android APP|
SERA Cloud IOT
Standard package contains
- GTCOM2 Communicator
- Direct mount antenna
- Packaging box
UPS power supply 12V /1.8A 36W AC/DC for automation & security…
GTalarm2 is hybrid powerful flexible GSM smart home / industry automation and alarm…
Waterproof DS18B20 sealed digital temperature probe lets you precisely measure temperatures…